Revit Users Group NFR Competition

Notices and other administrative materials

Moderators: Tim Waldock, corinoco, Wesley

Revit Users Group NFR Competition

Postby Toby Maple » 03 Mar 2009, 14:29

Due to the overwhelming response (NOT) of the competition entries for the NFR and the fact that it was won by a Committee member (congratulations John Hainsworth) we have extended the closing date for entries!!! NOW you have no excuse not to send them in!!! We will be giving away 1 x Not for Resale Autodesk application of your choice!!!! So read on for the conditions.

Please remember to check this message closer to the date as some changes may occur.

Conditions of Entry:

1. ALL WORK MUST BE PRODUCED ENTIRELY IN REVIT! Any image that has been modified in any other application will be excluded from the competition.
2. Please provide your best work as 1 image in electronic copy (in jpeg format) to your reseller (details below) with any information that identifies you, the project or the company must be either blanked out or removed
3. The competition entries will be shortlisted by the 3 resellers (limit of 1 image per company or person :lol: your best). Each reseller will select the best 3 images submitted to them.
4. Entries must be received by your reseller no later than 1st April 2009 (no joke!!)
5. The winner will be selected by the users on the night.
6. You must registered with RUGSYD AND attend the April meeting (14th April 2009 - we hope to show the 2010 products, so should be a big night!!!) to receive the prize, otherwise there will be a redraw.
7. Entries with identifying information on them will not be accepted.

A big thank you all our sponsors for making this possible.

• AEC Systems -
• CADGroup -
• KarelCAD -
• Autodesk - One NFR copy of any piece of Autodesk software

We are looking for examples of work demonstrating the best presentation or documentation & detailing techniques in Revit. Note that this does NOT necessarily mean rendering! Layout, proportions, and most importantly, the successful conveying of your message are all vital to a quality image. Work can be a single image or a page layout; rendered, shaded, or other format images; or anything else that centres around presenting your work (and ideas) to others.

Each reseller will select the best 3 images submitted to them. 9 images will go into the final held at RUGSYD April meeting on 14th April 2009 at AEC Systems 255 Pacific Hwy Nth Sydney

I will try and post the images here? and maybe create a poll that everyone can vote on. The 9 best shortlisted images will be identified on the night for final voting by the users to win the Autodesk NFR!!!You must be at the April meeting to receive the prize, otherwise there will be a redraw.

Thanks and good luck!!! See you all there!!

Don't forget next meeting is 10th March 2009.
Toby Maple
Revit Users Group Sydney
User avatar
Toby Maple
Active member
Posts: 238
Joined: 26 Apr 2006, 21:33
Location: The Rocks - Sydney
Company: HASSELL
When did you start to use Revit?: v4.1 2002

Return to Announcements

Who is online

Users browsing this forum: No registered users and 1 guest