Changing columns to structural columns (yes, you can!)

Central location for tips developed in other areas in the forums, or gleaned from other sources

Moderator: Tim Waldock

Changing columns to structural columns (yes, you can!)

Postby Wesley » 04 Aug 2008, 19:39

This is a biggie... worked out by Drew in Perth

... however I have found a way to fix this issue:

1) Select the column.
2) Select edit Family and open the family for editing.
3) select "Settings" on the top menu bar, then select "Family Categories and Parameters"
4) There is a check box at the bottom that reads "Automatically joins geometry to walls" - Uncheck this box.
5) You can then change the family category to structural from this same dialogue box.
6) Reload the column into your project and viola. All columns of that type upgrade to structural columns and "detach" themselves from the walls etc.

Hope this makes sense.
--------------------------------------------------
"the sooner you fall behind...
... the more time you have to catch up"
User avatar
Wesley
Founder
Founder
 
Posts: 384
Joined: 20 Apr 2006, 20:45
Location: North Sydney
Real Name: Wesley Benn
Company: BD Group
When did you start to use Revit?: v0.2 2000

Return to Tips and Tricks

Who is online

Users browsing this forum: No registered users and 1 guest

cron